Tips to Prevent Electrical Fire Hazards Due to short circuit

Prevention is better than cure, the adage applies to electricity. Before going on things like unwanted fire accident happens to you, we should do the precautions as described below:

We recommend that you submit the installation of 1 houses / buildings you on installers. Legally installer has the responsibility for security installations.

2 Try to avoid piling plug or power jack too much in one place (outlet) for the connection as it will continue to accumulate heat that can ultimately lead to electrical short circuit.

3 Use of electrical equipment that meets ISO standards and the right size.

4 Use the fuse is still good and replace it with a new fuse broken, do not try to connect a fuse with the fiber wire.

5. Take care of electrical installations periodically to determine if there is damage to the electrical equipment such as wires or insulation that is open on the connection. if possible replace all the installation path once every five years.

Step 6: Use the appropriate cable type and size designation and current-carrying capacity.

7 In the event of a fire due to electrical short circuit due to safety Mini circuit breaker (MCB) is not functioning properly, turn off the power immediately from KWH meters. Do not flush with water when the source of the fire is still no electric current.

8 If you need a new electrical connection to legally list the agency concerned, not from illegal sources.

Keep in mind that the short-circuit or short circuit is direct contact between the positive and negative wires are usually accompanied by sparks, and the sparks that triggered the fire. Agency concerned has installed MCB kWh and integrated with OA Kast which serves as a barrier when usage exceeds the load capacity as well as a safety when a short circuit occurs.