ELECTRICAL INSTALLATION HOUSEHOLD CARE

Electrical installation in any home that is used every day should always get a serious concern as it relates to the safety of life of its inhabitants. many home fires are caused by electrical short circuit, it is much caused by the negligence of the electrical installation that does not comply with the correct installation procedures or lack of concern for us in terms of maintenance of electrical installations in the home.
With good care and performed the periodic problems arising from listrikdapat prevented as early as possible. The following things need to be done for the installation of home care:

Outlet, note the inclusion of a hole in a wall outlet plug finger, this part is often the case, especially on the small sparks outlet that is not equipped with a grounding cable, consequently burning bodies melt outlet. Replace the outlet when the hole looks melted or has not installed the plug.

Switch, due to frequent pressed on and live the components in it to be weak or rusty and dirty covered / obstructed by the dust which resulted in lack of connectedness switch, it is characterized by hard turning on the light and unstable flame that lights lights such as flashing . There is also a switch damaged by wear anthill. therefore try to clean it occasionally opens switch to avoid the things described above.

Electrical connecting cable of electronic equipment, Trim it so that cables are not damaged squeezed or stretched taut heavy burden on sharp corners that can lead to peeling and breaking of wires that lead to electrical short circuit.

Plug / jack, check the position of the electronic devices that plug into a socket mounted continuously and rarely revoked as: refrigerators and electric water pump, plug it easy to loose his position on the outlet due to the small spark plug between fingers and outlet holes.

Light fittings, the fittings are fitted with power or wattage bulbs will easily melt large consequences attached lamp will be hard to be removed when replacing the lamp with a new one. In addition, light fittings installed in the ceiling would be prone to inundation due to rain water droplets from a leaky tiles, the manner of the rainy season occasionally try checking the house to see if there are light fittings flooded.
 
Cable roll / outlet terminals, cable outlet hole may melt due to the growing roll clamp plug finger in it, fix it by opening the box clamp cable clamp using pliers then roll each plate on the outlet which serves to clamp the incoming plug finger.

rust / corrosion, keep every appliance in the house alektronik weight / body is made of metal that is easily corroded because it can tear / peel the connecting cable to the power outlet and could result in short circuit or touched our skin.

Main line and installation of electrical wiring connections, check the power cord from the outlet to the start MCB, light fittings and switches are well connected and no wires are open / not insulated? note also that stretched cable clamp if his nails are still sturdy? cable cover is peeling due to rat bite with a special electrical cable insulation.

Cable lines outside the house / outdoor, check the cable that connects to the outside of the house lights and garden lighting, make sure all cables and connections plugged well. because this area rarely seen try to check by turning on the lights when there is no immediate fix function.