How to connect stranded cable CABLE WITH SINGLE

Splicing fiber cables with a single cable is rare and so far I have not heard about the connection, but sometimes we are forced or trapped in the situation, there are several factors that can cause the cord connecting the two different types made ​​such as: because cost limitations, may of us want to use the existing cable (former but still good), indeed it is legitimate for both the cable has to have clear specifications such as size and standardization

According to my experience there are several requirements that must be met if we are going to connect two different cables, namely:

     Minimum cable diameter size equal or similar to facilitate the process of rolling the cable.
     The cable used has a standard ISO and SPLN
     Used for branching cables, for example for the lights and switches.
     Correct way of connecting the cable that has the following requirements: a strong, far-flung distances with other connections, coated insulation.


Perhaps the way I explain this is rarely found in guide books electrical installation because it is the result of personal experience I am actually less fit if a single cable with a cable spliced ​​fibers because both are different types of cables, single cable used for electrical installations on the main line and its ramifications and the fact that a single cable commonly installed stationary in one place, while the fiber cable is commonly used on electronic equipment or that its use could roll the cable move.

Sometimes we are confused how to connect a single cable with stranded cable, various methods are used, but still, the results are less satisfactory, some effects of the cable connecting the less fit are:
- Easy connection release.
- Cable fibers easily break, especially on the part closest to the connection.
- An electric current that passes through the connection often dropped out and disconnected.
Perhaps of things that seeprti then I tried to find a way how to keep a wired connection does not pose a problem, for those who encounter problems in connecting cables with different types then please follow the steps and tricks that I've ever done.


Before you dial the cable would be nice if we first prepare the necessary equipment such as:
- Fiber cable
- A single cable
- Combination pliers
- Special insulation for electrical wiring

How to connect:
1. prepare both ends of the cable to be spliced ​​fiber cable and single cable then peeled coating (insulator) on the second cable to the existing copper wires visible inside 2-4cm.pilinlah roughly along the fiber cable in order to converge to facilitate the process grafting. hold both wires so it looks like side by side, in this position the location of the second parallel cable.

2.wrap the cable fibers in a single cable so that the coil covering half of a single cable
3. pull and bend the fiber cable until it is located opposite to the single cable.
4.wrap the rest of the cable is not twisted single fiber cable that can cover the winding single cable and single cable fiber cable itself.
5. in this way the connection is more powerful and well-connected, to keep the connection does not harm us then seal the connection with insulation.

With a few guidelines as above grafting may be able to answer questions that often arise when we want to connect a different cable types between fiber cables with a single cable.