There are times when the lights are mounted on light fittings experiencing some problems such as: unstable whice lights (flashing), the lights suddenly died when light conditions are still good when tried on another light fittings, light fittings and melting.
Such problems can occur due to several factors, including: a threaded lamp whice is not installed properly on the threaded fittings that caused the lack of a good connection between the lamp and fittingnya so all that happened was the electric current does not flow
How to resolve the problem is to:
Turn off the lamp switch and MCB.
Remove the lamp from the lamp fitting.
Use the flat-head screwdriver to pry the plate that is in the deepest part of the light fittings up to the plate fitting loosely away from the body.
At the time prying do it carefully so that the plate is not broken when taken out.
reinstall the lamp fitting, and turn the light switch MCB follows.
When the lights are on normal then repair light fittings successful but when the light is off there is the possibility of the cable that is attached to the connector breaking light fittings, light fittings try to let go of his place and check the wiring behind the light fitting might not be installed at both cable connector.
No comments:
Post a Comment