The reason is because people change light fittings light fittings long been damaged by broken or melted by the heat of the lights or just want to replace the old fitting a model with a new model that would suit our tastes. This article discusses how to change light fittings light fittings mounted on the ceiling and just as an example, there may be too light fittings installed at any place other than the ceiling of the house but the principle is the same, hopefully this article can be useful for those who need it.
at the time of replacement of light fittings is recommended to turn off the switch of MCB in advance to avoid the danger of electrical shock from touching the skin saaat cables and terminals on which we replace the light fittings.
How to remove the old light fittings from the ceiling:
Remove the bulbs from the fitting and keep it in a safe place, then open the screw located on the lamp fittings using the plus or minus screwdriver according to the shape of the head of the screws.
After the light fittings screw pull apart slowly and carefully from the stand so the cables are still connected is not broke, then after it will be seen dangling wires and still be connected to the terminal light fittings. may in part there is no use fitting holder for light fittings but directly attached to the ceiling.
Remove the cables connected to the light fitting by turning the screw counter-clockwise contained in terminals located behind light fittings.
How to install new light fittings
Connect the two wires former old light fittings located in the ceiling light fittings to the new terminal by way of the cable entering the second terminal to the new light fittings, screws and rotate the screwdriver clockwise until it feels tight to wear.
Attach new fittings to the ceiling and insert the screw and tighten using a screwdriver.
Cables attached to the light fittings consist of:
The phase / positive from the main line electrical installations previously disconnected or connected by a switch.
Cables neutral / negative directly from the main line of electrical installations.
No comments:
Post a Comment