How to connect / wrapped around the stranded cable

My post this time is a continuation of the previous post I am about how to connect a single power cord, because I have encountered many fiber cable connections that do not meet the security requirements, especially for power cable connection to the electronic equipment is very risky short-circuit resulting in a fire. To avoid the negative result of an error while connecting fiber cables, below I have outlined some guidelines for security and safety, namely:

     Fiber cable is spliced ​​to be really strong to be easily separated saaat not interested, to strengthen the connection cable after cable spliced ​​fibers should be followed by soldering with lead, if not soldered can also dengnan mmbuat strong connection node.
     Cover the wires which are connected using a common lasdop sold in the market or can be closed using a special insulation for electrical wiring tehan to weather and fire.
     For the connection of two wires adjacent cultivated no distance between the joints in order to avoid short circuit or short circuit.


How to connect a fiber cable safely:

picture 1

1 Peel off both ends of the cable to be spliced ​​up then twisted copper strands into one.

2 Hold both ends of the cable to cross each position (Figure 1.)
 

picture 2

3 Helical second cable about two or three rounds (figure 2).
 

picture 3

4 Fold both ends of the cable downwards (figure 3).

picture 4

5. Helical both ends of the cable which has been folded down as much as two or three rounds (figure 4).
 

picture 5

6 Wrap each end of the cable to the rest of the left and right, try no tontolan because the cable can tear insulation bulge (figure 5).
 

picture 6

7 Close the connection with isolation until no longer visible cable connections are open (Figure 6).

picture 7

8 For a wired connection adjacent the location of the cable connection is attempted far from each other (Figure 7)