Sunday, August 31, 2014

HOW TO INSTALLING ELECTRICAL INSTALLATION FOR ONE OUTLET +, + SWITCHES TWO, TWO LIGHTS

This time I will share knowledge about how to install the electrical installation for a single outlet +, two switch +, two lights. The set is useful when we want to control two lights in different rooms using a separate switch for each lamp and has an outlet that is located adjacent to the second switch. The main components in this circuit are switch and socket, we can choose a model switching system according to our wishes, for example:

     The model is integrated in one box consisting of two switches and a single outlet.
     Separate models, which is adjacent to a place we have an electrical outlet box and the box contains two switches.


Any model that we like, in the installation of the installation remains the same. For more details, please refer to the explanation below.

Equipment needed:
- Screwdriver plus and minus
- Tang taper combination
- Knife cutter.

The materials to be installed:
- The mains which has joined with two switches
- Cable NYM 2X1,5 size "length tailored to the needs.
- Enough cable clamps.
- Electrical insulation

Stages of installation:

     As always turn off the switch of MCB to prevent electric shock
     Connect the positive and negative wires from the main line to the house electrical installations in each of the existing connector on the outlet.
     merge / jumper two connectors of each switch using a short cable and then connect the jumper cable to the connector outcomes outlet is connected with positive cable (black) from the main line of electrical installations.
     Connect one connector switch that is not connected to the ubiquitous connector to one of the light fittings.
     Connect the switch connector is not connected to the ubiquitous connector to one of the light fittings. others.
     Combine (jumper) the second connector of the second light fittings are not installed anywhere and then connect the results of the jumper cable to the negative (blue) main line electrical installations in the home.
     When required the cable can be plugged into a socket grunding / grounding
rangkaian instalasi
Picture series of electrical installation of the outlet switch + two +, two lights
  Caption:
+, Positive cable main line of electrical installations
-, Negative cable main line of electrical installations
G, cable grounding / earthing
STK, outlet
L1, Lamp 1
L2, Lamp 2

After all the wires attached close all cable connections use special insulation for electrical wiring. To tidy up the cable pathway along the cable clamps attach cable clamps spaced 50cm.

1 comment:

  1. but instead is run at a below boiling point range - which is less than efficieent. If water pressure ever goes low, Serious Electricians Sydney

    ReplyDelete